A foreign drive has been plugged in to your Lima


You installed your Lima with a hard drive, and for some reasons (expanding your storage capacity for example, or because it's not recognized),  you'd like to either switch to a new one or start over with the same one.

How to do that? 

  • Unplug the Ethernet cable between the Lima device and your router. Wait for a minute.
  • Unplug your external drive.
  • Copy the .lima folder out of your Hard Drive: this step is very important! Do not copy the folders only.



The .lima folder is a visible folder when using Windows, but it's a hidden one on Mac (meaning you do not see it). You will have to set up Finder on your Mac to show all hidden files. Don't worry, it is easy to do!

Go to Applications >> Utilities >> Terminal

Screen Shot 2016-01-22 at 11.10.06 AM

Once the Terminal prompt is open, enter the following sentences:

Screen Shot 2016-01-22 at 10.49.55 AM

That should make all your hidden folders appear!

You can now find the .lima folder on your Lima drive, and copy it out of the Hard Drive (on your computer, or on an other external Hard Drive for exemple).

To set it back once you found the .lima folder (seeing all the hidden folders can be irritating), just switch TRUE to FALSE in the same Terminal prompt.

To finish the switch:

  • Format your new hard drive either to NTFS, HFS+ or Ext4.
  • Copy back the .lima folder in your freshly formatted Hard Drive.
  • Plug it back to the Lima.



On Windows you may need to use the command line. If the old USB disk is F: and the new disk is G:, the syntax will be:

If you don't have the old disk (e.g. you formatted it), please get in touch with the support team.


You should be good to go! You should be able to recover your data from your new hard drive across your devices. 



powered by Typeform

Did this article answer your question?    YES    |    NO


0 out of 0 found this helpful



Article is closed for comments.